GPS Lighting Sequence
GAT23 GPS Tracker
A flashing blue LED means the device is searching for a GPS.
A solid blue LED means the device now has GPS and will start reporting.
A solid green LED means the device is fully charged. Please be aware that once the device is moved it will turn red again.
A solid red LED means the device is charging.
FMT100 GPS Tracker & Other Teltonika Devices
Two flashing LEDs means the device is working
When one LED is flashing and the other is solid, this means that the device has no GPS connection and its position needs to be moved
GL320MG GPS Tracker
The fast flashing blue LED means the device is searching for GPS
The slower flashing LED means the device has GPS on but the GPS data is wrong
The solid blue LED means the device now has GPS
The fast flashing green LED means the device is searching for a network
The slower flashing green LED means the device has network
The solid green LED means the SIM of the device is locked
The fast flashing red LED means that the device is charging
The slow flashing red LED means that the device is running low on power
The solid red LED means the devices charging is complete and ready to be used
GV57 GPS Tracker
The fast flashing green LED means the device is searching for a network
The slow flashing green LED means the device has a network
The solid green LED means the devices SIM needs PIN
The fast flashing red LED means the device is searching for satellite connection
The slow flashing red LED means the device has a data error
The solid red LED means the device has GPS
GL50B GPS Tracker
The red LED will flash when the device is first turned on. The LED will turn solid for 30 seconds once it has found a network and then it will go off. If the red LED flashes continuously for 5 minutes, it will go off but this means the device has not found a network. If you turn the device off for a minimum full minute and go outside and turn the device back on, it should find a network
FMB920 GPS Tracker
Two flashing green LEDs means the device is searching for GPS and GPRS
When both green LEDs are solid this means the device has found GPS and GPRS
FMT200 GPS Tracker
When either LEDs are flashing. The blue LED means the device is searching for GPS and the red LED means the device is searching for a network.
When either LEDs are solid. The blue LED means the device has found GPS and the red LED means the device has found a network.
GAT24 GPS Tracker
Battery Indicator (Green LEDS) :
The green LEDs will flash when the device is charging and the LEDS flash according to the number of grids charged. They stay on when fully charged!
The GAT24 defaults to all lights off. To display the status lights, short press the power button and they will appear for 3 minutes. The light state is in high power consumption, it is only when the lights are off that it will enter low power consumption.
When the yellow LED is flashing at a fast pace, this means the device is searching for a GPS signal.
When the yellow LED is solid, this means that GPS has been located.
Note: If you are having difficulties with the yellow light appearing, it could mean the GPS is asleep, make sure you press the light button again.
When the red LED is flashing at a fast pace, this is the device initializing GSM.
When the red LED is flashing at a slower pace, this means the GSM receiving signal is normal.
When the red LED is solid, GPRS is online.
Note: No GSM signal received means the SIM card may not be inserted correctly or the device has gone into low consumption mode, to fix this just hold the power button again.
FMT300 GPS Tracker
When the green LED(GSM) is flashing at a fast pace, this means the device is initializing the network.
When the green LED(GSM) is flashing at a slower pace, this means that the network is receiving signals normally.
When the blue LED is flashing at a fast pace, this means the device is searching for a GPS signal.
When the red LED (power) is flashing at a fast pace, this means the device has a low or faulty battery.
When the red LED (power) is flashing at a slower pace, this means that external power is off .
Lights not on or not flashing :
When the green LED has no light, this means the device has not found a network signal .When the blue LED has no light, this means the GPS has either gone into hibernation or is faulty.When the red LED has no light, this means an externa power failure or internal fault .
When are lights are solid and bright, this means they have all found their signal. The green LED at a solid state means the device is online.The blue LED at a solid state means GPS has been located and the red LED at a solid state means the device is on and working.
Note: If you are having any problems with the lighting sequence of this device, please contact our office for support.
